 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ALUMINUM ELECTROLYTIC CAPACITORS WH Chip Type, High Reliability High Temperature (260C) Reflow series Corresponding with 260C peak reflow soldering Recomended reflow condition : 260C peak 5 sec. 230C over 60 sec. 2 times (8 x 6.2, 10 x 10 : 1 time) WH High Temperature Chip type high temperature range, for +125C use. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). Reflow UB Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan Performance Characteristics - 40 ~ +125C 10 ~ 50V 10 ~ 330F 20% at 120Hz, 20C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4(A) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20C Rated voltage (V) tan (MAX.) 10 0.32 16 0.24 10 12 25 0.21 16 8 25 6 35 0.18 35 4 50 0.18 50 4 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Endurance After 1000 hours' application of rated voltage at 125C, capacitors meet the characteristic requirements listed at right. Capacitance change tan Leakage current Within 30% of initial value 300% or less of intial specified value Initial specified value or less Shelf Life Resistance to soldering heat Marking After storing the capacitors under no load at 125C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250C Capacitance change Within 10% of initial value for 30 seconds. After removing from the hot plate and restored tan Initial specified value or less at room temperature, they meet the characteristic requirements Leakage current Initial specified value or less listed at right. Black print on the case top. Chip Type (8 x 6.2) Type numbering system (Example : 10V 100F) Voltage (A:10V) Series fD0.5 C0.2 0.5MAX. Plastic platform 0.3MAX. B0.2 Positive A0.2 A0.2 UWH 1 A 1 0 1 M C L 1 G S Package code Configuration Capacitance tolerance (20%) Rated Capacitance (100mF) Rated voltage (10V) Series name Type A B C E L H fD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Trade mark N2 100A WH Lot No. Capacitance L0.3 H E Negative (8 x 10, 10 x 10) Voltage (V:35V) Series 0.5MAX. Plastic platform 0.3MAX. fD0.5 C0.2 Positive A0.2 A0.2 L Trade mark Lot No. Capacitance Voltage V Code 10 A 16 C 25 E 35 V L0.5 8 6.2 3.3 8.3 8.3 2.3 6.2 0.5 ~ 0.8 8 10 2.9 8.3 8.3 3.1 10 0.8 ~ 1.1 10 10 3.2 10.3 10.3 4.5 10 0.8 ~ 1.1 (mm) N2 100V WH B0.2 H 50 H Dimension table in next page. E Negative CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS WH Cap.(F) series Dimensions V Code 10 1A 16 1C 25 1E 35 1V 8 x 6.2 8 x 6.2 8 x 6.2 44 52 80 8 x 10 10 x 10 50 1H 24 38 46 58 10 22 33 47 100 220 330 100 220 330 470 101 221 331 8 x 6.2 8 x 10 10 x 10 58 90 112 8 x 10 10 x 10 66 102 8 x 6.2 8 x 10 10 x 10 48 74 116 8 x 10 10 x 10 Case size D x L (mm) Rated ripple Rated Ripple (mArms) at 125C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UWH1V101MCL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |